Pneumatic Power TURBO Type Solenoid Valve Diaphragm M55 For Pulse Blowing Valve
Solenoid and diaphragm valves work together for the efficient operation of the cleaning system in a Pulse-Jet Dust Collector.
Diaphragm Repair Kits M75,M25 For Turbo Integral or Remote Pilot Pulse Jet Valve.
The diaphragms are repair kits for the Turbo pusle valves: FP65, FM65 , SQP75-IN, SQM75-IN, SQP100-IN, SQM100-IN
We produced series TURBO type diaphragm repair kits, it is nice replacement for Turbo diaphragm.Ordering code: M20, M25, M40, M50, M55, M75
| Ordering Code | Fitted Valve Code | Valve Port Size | Mateiral |
| M25 | All Type | 1" | Nitrile/Fluororubber |
| M40 | FP40,FM40
DP40,DM40
EP40,EM40 | 1-1/2" | Nitrile/Fluororubber |
| M50 | FP55,FM55
SQP50,SQM50
SQP60,SQM60 | 2" | Nitrile/Fluororubber |
| M75 | FP65,FM65
SQP75-IN,SQM75-IN
SQP100-IN,SQM100-IN | 3" | Nitrile/Fluororubber |
Practical sample for reference
Of course,corresponding pulse valve can be available
Guarantee the delivery in time
Structure performance of Diaphragm
Composed of one or more layers of two sides coated with glue, and also of rubber without fabric clip. According to the shape of the separation method membrane pressure method. According to the requirements of the production of different rubber, different fabric diaphragm. The properties of nitrile rubber and polysulfide rubber blends used in the diaphragm, the properties of rubber materials used in the canvas disc diaphragm and some silicone rubber, fluoro rubber and chloro rubber membranes developed in recent years are described as follows.
The operating temperature and pressure range of the diaphragm itself depends on the rubber, fabric and structure. The diaphragm can work at -50~100 ° c and 0.4~ 0.8mpa. Fluoro rubber and silicone rubber diaphragm can work at -80~232 ℃. Chlorol rubber diaphragm can work under pressure of 0.4~ 0.8mpa, with good air tightness, aging resistance, and the service life is equal to that of engine overhaul.
Working Principle of Diaphragm
The air is uniformly distributed avoid channeling Initially a coat of material forms on the bags Subsequently, the coat acts as the filtering medium. The dust is accumulated on filter elements while the air passes thorough the filter bags from outside to inside. the accumulated powder is dislodged from the bags by reverse pulse-jet air intermittently. The dislodged powder falls on bottom cone and is discharged through powder discharge valves. The dust free air is sucked by induced draft fan and is exhausted to atmosphere.
The selection of pulse valve with low resistance and high injection volume can remove larger area of filter material and greatly save the overall cost of the injection system. Due to the reduction of the number of valves, the operation and maintenance costs of the dust collector will also be reduced accordingly, so we should choose the electromagnetic valve diaphragm suitable for high, medium and low pressure range.
If you have the present or future demand of our products,pls contact us without any hesitation
Product Tags:
|
|
Industrial Dust Collector Solenoid Valve Diaphragm M55 For Pulse Blowing Valve Images
|
