| Model number | BB14040007 |
| Ref number | 400425-142, 400425-144, 400425-101, 400425-105, 400425-118, 400425-117 |
| Normal voltage | AC110V, AC220V, DC12V, DC24V (Other can be customized) |
| Normal power | AC:28VA, DC: 18Watt |
| Material | BMC, Brass |
| Wire class | H |
| Connection | DIN43650A |
| Application | ASCO SCG353A047, SCG353A050, SCG353A051, SCEX353.060 Pulse Valve |
| Hole diameter | 14 mm |
| Height | 40 mm |
| Width | 44.5 mm |
| Valve Model | Repair Kits | Solenoid Coils |
| AC | DC | 24VDC | 24 VAC | 110VAC | 220VAC |
| SCG353A043 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| ACG353AD44 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| ACG353052 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| SCG353053 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| SCG353AD47 | C113827 | C113827 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353050 | C113685 | C113686 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353051 | C113685 | C113686 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353060 | C123432 | C123433 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353AD65 | C113827 | C113827 | 400425342 | 400425101 | 400425118 | 400425117 |
Main Dimension of 400325-142 ASCO Type Pulse Valve Coil:
Dust collection system with Pulse Diaphragm Valve Electric Magnetic Coils:
The boiler dust collector cleaning control adopts three control modes: time control, differential pressure control and hybrid control, which realizes automatic and manual control mode switching, and realizes automatic switching and manual switching in the field. At the same time, backflushing and ash removal can realize off-line and double-line ash removal.
(1) Automatic control
When the boiler dust collector is in operation, the ash removal control can be selected according to time, pressure difference or mixing mode, usually by mixed control method (time and pressure difference combined). The hybrid control method is based on time and selects the pressure difference. According to the given pressure difference design value, if the pressure difference is less than the set value during operation, it will work according to the set time; if the pressure difference is greater than the set value, the equipment will be cleaned immediately. When cleaning the ash, each room of the dust collector is sprayed with ash. When the complete cleaning is completed, when the pressure is less than the set value, the timed cleaning is entered. If the pressure is still greater than the set value, the cleaning is continued. The timing cleaning is entered until the pressure is less than the set value.
(2) Manual control
In the on-site operation cabinet, each room can be manually controlled according to the cleaning procedure, once cleaned, and each room can be cleaned separately. The on-site operation cabinet is equipped with a manual operation switch device working status indicator light, which is used for cleaning the production check and debugging of each equipment of the system.
Product Characteristic:
1. Using high quality wire which has UL approved;
2. Using high quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof coils and so on.
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
