PMF Bulkhead Female Straight Pneumatic Push-In Fittings 1/8'' 1/4'' 3/8'' 1/2''
Push to connect pneumatic straight connection fittings enable quick tubing connection and disconnection. These pneumatic components feature stainless steel gripping collets and internal O-rings to ensure a leakproof proper fit. Additionally, the quick-connect collet prevents the tube from being released through a connection that can be released through the push of a button.
Most popular straight push-in fittings with male or female threads. Fittings have hexagonal body allowing tightening with wrench, additionally our fittings can be screwed with tool, which is especially convenient where there is limited access to installation place. In this category you can find push-in fittings with threads in following sizes: M5, 1/8'', 1/4'', 3/8'' and 1/2'' for hoses with diameter from 4 mm to 16 mm.
Technical data of Pneumatic Hose Fittings:
| Material | |
| Threaded Connection | |
| |
| |
| |
| Working Pressure | |
| Connecting Tube | |
| |
| Connecting Diameter Tube | 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm (Outer Diameter) |
| Medium | |
| Working Temperature | |
Specifications of PMF Bulkhead Female Straight Pneumatic Hose Fittings:
List of All Push To Connect Pneumatic Hose Fittings:
Choosing the Right Fittings for Your Pneumatic System:
Fittings help control the force and directional flow of compressed gas or air used in pneumatic systems. One of the first considerations in choosing a connector is the type of vessel that you will be connecting to such as the flexibility of the hose or tube, as well as the inner diameter (ID) and outer diameter (OD) of the vessel to ensure an adequate seal and secure connection. Fitting material choice for your pneumatic connector is also important, including gas compatibility or resistance to heat or corrosion.
Other considerations in choosing the right pneumatic system connector include:
1. Type of connection and the function it performs
2. Operational pressure of the pneumatic system
3. Operating temperature range
4. P.S.I. requirements for your application
5. Amount of vibration produced by the pneumatic system
6. Thread type of the receiving fitting
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
PMF Bulkhead Female Straight Pneumatic Push-In Fittings 1/8'' 1/4'' 3/8'' 1/2'' Images
|
